If you put the SB into tour mode, lift the toe piece to at least a 45 degree angle. Hold the ski down and try to wiggle the toe piece side to side. Is there just a click? A lot of movement? No movement at all?
Just curious because I had a friend who basically sawed through the free pivot axle bar in a couple of seasons of touring. I don't want that to happen to me when I'm in the middle of nowhere.
To follow-up, I contacted Voile and they got back to me right away:anemic wrote:wow yikes i thought the Switchback would be the perfect next binding for me. Watching this thread with interest...
"They sound like they are getting wore out. I don't think there will be a big failure while skiing, but the brass bushings inside the riser are probably wearing out. They are very durable, but they won't last forever. The pivot axle is solid stainless steel, I have not seen any fail."
I've continued to ski these bindings (several times a week) and do NOT notice any problems when skiing (neither in Tour mode nor Ski mode). I have skied these bindings several hundred days with LOTS of touring, so I'm NOT surprised they are wearing out. They have been absolute workhorses and I will be buying them again.
- XCD Enthusiast
- Posts: 1
- Joined: Sun Apr 21, 2019 9:34 am
- Location: Tromsø, Norway
- Favorite Skis: DPS Wailer
- Favorite boots: Scarpa T2
I came across this thread when searching online after the axle of my Switchback X2's broke - so it can happen The very outermost part of the axl broke on one side while traversing up a slightly ice slope. I was suddenly on my ass, with the binding still on my foot, but no ski. Luckily not very steep terrain, and managed to stop against a tree. I don't think this would happen in downhill mode. Got no warning before it snapped of.