Risers
- Stephen
- Posts: 1458
- Joined: Thu Aug 06, 2020 12:49 am
- Location: PNW USA
- Ski style: Aspirational Hack
- Favorite Skis: Armada Tracer 118 (195), Gamme (210), Ingstad (205), Objective BC (178), Nordica Enforcer 94
- Favorite boots: Alfa Guard Advance, Scarpa TX Pro
- Occupation: Beyond
6’3” / 191cm — 172# / 78kg, size 47 / 30 mondo
Risers
I admit it — I’m ignorant on the use and reasons for risers. Can someone educate me on the different reasons to use them? Thanks.
- Nick BC
- Posts: 264
- Joined: Sat Mar 19, 2016 10:04 pm
- Location: Vancouver, BC
- Ski style: Free heel Resort/Backcountry
- Favorite Skis: Voile Vector BC,Trab Altavia and Hagan Ride 75
- Favorite boots: Scarpa TX and T3
- Occupation: Retired Community Planner
Re: Risers
Two reasons I can think of are:
1) To prevent boot out with three pin bindings mounted flat on narrow waisted skis; and
2) To give greater hold (4 hole riser) for three pin bindings with three screws.
1) To prevent boot out with three pin bindings mounted flat on narrow waisted skis; and
2) To give greater hold (4 hole riser) for three pin bindings with three screws.
- fisheater
- Posts: 2532
- Joined: Fri Feb 19, 2016 8:06 pm
- Location: Oakland County, MI
- Ski style: All my own, and age doesn't help
- Favorite Skis: Gamme 54, Falketind 62, I hope to add a third soon
- Favorite boots: Alpina Alaska, Alico Ski March
- Occupation: Construction Manager
Re: Risers
Additionally, by raising the boot above the ski the riser acts as a lever or provides leverage that can assist turning a wider waisted ski.
I personally have not needed risers on skis in the mid -70 mm range. I have a riser in a mid 80 mm waist. Most alpine bindings and Telemark bindings have a riser. The exceptions are Nnn-BC and the Rottefella Super Telemark and Voile’ Heavy Duty Mountaineer and 3- pin cable. Most everything else has a riser incorporated into the binding.
So in review, to prevent the boot from hitting the piste in highly angulated turns ( boot out )
The Voile’ riser incorporates a 4 screw pattern to fasten to the ski.
A riser gives the boot greater leverage over the ski as it acts as a lever.
I personally have not needed risers on skis in the mid -70 mm range. I have a riser in a mid 80 mm waist. Most alpine bindings and Telemark bindings have a riser. The exceptions are Nnn-BC and the Rottefella Super Telemark and Voile’ Heavy Duty Mountaineer and 3- pin cable. Most everything else has a riser incorporated into the binding.
So in review, to prevent the boot from hitting the piste in highly angulated turns ( boot out )
The Voile’ riser incorporates a 4 screw pattern to fasten to the ski.
A riser gives the boot greater leverage over the ski as it acts as a lever.
Re: Risers
Hey fish, any way to install risers for BC NNN? would love to have them for climbing steep terrain.
- CwmRaider
- Posts: 599
- Joined: Wed May 15, 2019 6:33 am
- Location: Subarctic Scandinavian Taiga
- Ski style: XC-(D) tinkerer
- Favorite Skis: Åsnes FT62 XP, Børge Ousland
- Occupation: Very precise measurements of very small quantities.
Re: Risers
For the reasons already mentioned, plus:
- I like climbing wires (heel rests) for steeper terrain, its easier on the calfs, and the risers make this possible with Rottefella ST bindings. Perhaps the Voile have this possibility built in without riser plates
- If you were to use 75mm bindings on narrow waisted skis, you would increase clearance between the bindings and snow and cause less rubbing.
- I like climbing wires (heel rests) for steeper terrain, its easier on the calfs, and the risers make this possible with Rottefella ST bindings. Perhaps the Voile have this possibility built in without riser plates
- If you were to use 75mm bindings on narrow waisted skis, you would increase clearance between the bindings and snow and cause less rubbing.
- lowangle al
- Posts: 2741
- Joined: Sat Jan 11, 2014 3:36 pm
- Location: Pocono Mts / Chugach Mts
- Ski style: BC with focus on downhill perfection
- Favorite Skis: powder skis
- Favorite boots: Scarpa T4
- Occupation: Retired cement mason. Current job is to take my recreation as serious as I did my past employment.
Re: Risers
In addition to the reasons above, risers will make you look taller and you will not have to bend over as far when tightening your boots laces.
I have seen what looked like homemade risers made out of a hard plastic for tele bindings, it should be doable. If you want them to be able to install climbing bars you will have to do some additional engineering. You can make what are essentially climbing bars out of pvc pipe and bungy cords. They ride on the back of your boot until you need them, then you put them under your heel. Someone used to sell them, maybe Voile, but they would be easy to make. If I had access to mine I'd post a picture.
- fisheater
- Posts: 2532
- Joined: Fri Feb 19, 2016 8:06 pm
- Location: Oakland County, MI
- Ski style: All my own, and age doesn't help
- Favorite Skis: Gamme 54, Falketind 62, I hope to add a third soon
- Favorite boots: Alpina Alaska, Alico Ski March
- Occupation: Construction Manager
Re: Risers
JYW, Voile does sell their heel pieces. You would need to remove the heel piece on the Rotefella NNN-BC. I think the best heel piece / climbing wire combination would be what is used on the 3-pin cable binding. I attached a link to the 3-pin Traverse Binding.
https://www.voile.com/voile-3-pin-cable ... riser.html
Call or email Voile to get the correct heel piece and climbing wires.
You really could use climbing wires to climb the mountains you ski. I don’t think too many people do what you are doing on NNN-BC gear.
- Nitram Tocrut
- Posts: 529
- Joined: Thu Dec 27, 2018 10:50 pm
- Location: Quebec, Canada
- Ski style: Backyard XC skiing if that is a thing
- Favorite Skis: Sverdrup and MT51
- Favorite boots: Alpina Alaska NNNBC
- Occupation: Organic vegetable grower and many other things!
Re: Risers
I skied once with boby13 and he had a heel riser with its NNNBC mounted FT62.
I suggest you PM him or maybe he is actually reading this post
I suggest you PM him or maybe he is actually reading this post
- bgregoire
- Posts: 1511
- Joined: Fri Aug 22, 2014 9:31 am
- Ski style: Nordic backcountry touring with lots of turns
- Favorite Skis: Fisher E99 & Boundless (98), Åsnes Ingstad, K2 Wayback 88
- Favorite boots: Crispi Sydpolen, Alico Teletour & Alfa Polar
Re: Risers
I'm thinking people here are confusing "riser plates" and "climbing heels".
I'm sorry but a NNN BC "heel riser" is a crazy idea. I had a friend that tried it. Its like skiing with high heels. It hurts plus the rails of the binding no longer lock into the boot sole.
However using a very thin climbing heel with included climbing wire is a neat idea on NNN-BC. The problem is the thins ones are mostly unobtainium.
Here, what I call the "heel riser" is bottom right. The proper climbing heel for NNN BC is top left. Both are climbing heels of course but the bottom right one is meant to be used with a riser plate.
I'm sorry but a NNN BC "heel riser" is a crazy idea. I had a friend that tried it. Its like skiing with high heels. It hurts plus the rails of the binding no longer lock into the boot sole.
However using a very thin climbing heel with included climbing wire is a neat idea on NNN-BC. The problem is the thins ones are mostly unobtainium.
Here, what I call the "heel riser" is bottom right. The proper climbing heel for NNN BC is top left. Both are climbing heels of course but the bottom right one is meant to be used with a riser plate.
I live for the Telemark arc....The feeeeeeel.....I ski miles to get to a place where there is guaranteed snow to do the deal....TM
Re: Risers
awesome! the one on the left looks great.
Thanks for all the info!
I looked at the Voile heel and its 18mm. assuming a 10mm toe on the NNN BC binding, its about a 2 degree delta...I don't know how that would affect skiing performance having that forward lean as nordic is zero degrees...with a possible heel rise already from the boot.
I obviously don't have any idea what the proper name or parts are. I just know I want a heel lifter/climbing heel as Voile calls it to assist for ascents and then fold it down for the descent or when not using them. Thats where an AT binding's heel lifter is nice because it is completely out of the way when not in use.
That would be some frankenmod!
I skiied some low angle 4-6" fresh dry light powder today on ft62s...it was incredibly good. If the mountains aren't wind-loaded tomorrow, I may attempt a very steep slope on the ft62s with full skins. 1400ft vertical in 1 miles. That climb would be great if there was an AT like heel lifter.
I am going to investigate further and if it looks plausible, I will see if my local shop is willing to install it on my old S112s and will definitely report back!
Thanks for all the info!
I looked at the Voile heel and its 18mm. assuming a 10mm toe on the NNN BC binding, its about a 2 degree delta...I don't know how that would affect skiing performance having that forward lean as nordic is zero degrees...with a possible heel rise already from the boot.
I obviously don't have any idea what the proper name or parts are. I just know I want a heel lifter/climbing heel as Voile calls it to assist for ascents and then fold it down for the descent or when not using them. Thats where an AT binding's heel lifter is nice because it is completely out of the way when not in use.
That would be some frankenmod!
I skiied some low angle 4-6" fresh dry light powder today on ft62s...it was incredibly good. If the mountains aren't wind-loaded tomorrow, I may attempt a very steep slope on the ft62s with full skins. 1400ft vertical in 1 miles. That climb would be great if there was an AT like heel lifter.
I am going to investigate further and if it looks plausible, I will see if my local shop is willing to install it on my old S112s and will definitely report back!