Forgot to add. ETA would be Dec 2.

Shipping would be $15, so it'd be $35 total. What do you think?

I'm far from an expert, but I just did the same with a pair of skis I picked up for next to nothing. You will more than likely need new holes - the holes from the BC binding will likely be in the wrong position. You will need to fill in the old holes. I'm not going to tell you where to drill your ne...

I pulled the bindings off a set of thrift store skis. They look like they were barely used. $20 plus shipping cost or meet in Salem Oregon to pick up in person.

Sold

Thanks all. Now that I've figured out the toe piece is alright, I should be able to figure out what the deal is with the cables. In the photos you have the right boot in the left binding, and the left boot in the right binding. Try swapping them around. The notch in the rear of the binding goes on ...

Thanks all. Now that I've figured out the toe piece is alright, I should be able to figure out what the deal is with the cables.

I'm not positive but what you are calling "rods" I call cables on mine. Is it possible that the cable/rods are not original to the binding? Post a pic if you can before you modify your boots. I'm thinking bend the cables a bit? The boots are hanging up on the edges of the cables. I found a small pi...

Bud, are the boots in the correct binding, left boot in left binding, etc? Binding dimensions have not changed. What size are your boots? Those Chili cables will force your boots to "set" into the toepieces if the cable tension is correct. If for some reason they will not, then it's certainly ok to...