mounting super telemark bindings onto world piste skis

This is the World Famous TelemarkTalk / TelemarkTips Forum, by far the most dynamic telemark and backcountry skiing discussion board on the world wide web. We have fun here, come on in and be a part of it.
Post Reply
User avatar
WorldMogul
Posts: 15
Joined: Thu Jan 21, 2021 11:35 pm
Location: Winter Park

mounting super telemark bindings onto world piste skis

Post by WorldMogul » Thu Jun 24, 2021 1:13 pm

I am looking to mount Rottefella Super Telemark bindings onto K2 world piste ski (pre-drilled with 4 hole inserts). I would like to use the inserts that are already there.

Does the Rottefella Super Telemark riser plate (link below), have a 4 hole pattern on the bottom to attach to the world piste skis?
https://www.telemark-pyrenees.com/rotte ... iser-plate

The rottefella cobra(link below) has a 4 hole pattern metal plate that fits the world piste skis? Would that same metal plate work with the super telemark riser?
https://rottefella.no/media/pdf-manuals ... bra-R8.pdf

Other advise on getting the Super Telemarks onto the world piste skis appreciated!
Thanks!

User avatar
riel
Posts: 301
Joined: Tue Dec 15, 2020 9:31 pm
Location: New Hampshire
Ski style: BC XC
Favorite Skis: Asnes Gamme, Ingstad & Støretind, Fischer Mountain Cross & E99
Favorite boots: Fischer BCX675
Website: https://surriel.com/
Contact:

Re: mounting super telemark bindings onto world piste skis

Post by riel » Thu Jun 24, 2021 3:49 pm

WorldMogul wrote:
Thu Jun 24, 2021 1:13 pm
I am looking to mount Rottefella Super Telemark bindings onto K2 world piste ski (pre-drilled with 4 hole inserts). I would like to use the inserts that are already there.

Does the Rottefella Super Telemark riser plate (link below), have a 4 hole pattern on the bottom to attach to the world piste skis?
https://www.telemark-pyrenees.com/rotte ... iser-plate
The Voile riser plates attach to the ski with 4 screws, and then 3 screws are used to attach the bindings to the riser plates. That may be your best option. Those riser plates are available in several heights.

The Rottefella riser plates have 3 screws that go all the way from the binding, through the riser, into the ski. That doesn't sound like what you want.



User avatar
Nick BC
Posts: 265
Joined: Sat Mar 19, 2016 10:04 pm
Location: Vancouver, BC
Ski style: Free heel Resort/Backcountry
Favorite Skis: Voile Vector BC,Trab Altavia and Hagan Ride 75
Favorite boots: Scarpa TX and T3
Occupation: Retired Community Planner

Re: mounting super telemark bindings onto world piste skis

Post by Nick BC » Thu Jun 24, 2021 9:38 pm

Just a small point, if you use the Voile Traverse risers with a Super Telemark binding you will have to file/sand a small amount of plastic from the raised rear portion. The ST is a smidgen longer than the Voile HD Mountaineer. Not a big deal and I found this out when I mounted a Super Telemark cable binding on the Traverse shim.



User avatar
WorldMogul
Posts: 15
Joined: Thu Jan 21, 2021 11:35 pm
Location: Winter Park

Re: mounting super telemark bindings onto world piste skis

Post by WorldMogul » Thu Jun 24, 2021 11:45 pm

Ok thanks for the good info!! I ended up using the cobra mount plates which have the 4 hole pattern on bottom...the ST doesn't fit perfect onto it, but a bit of duct tape made it workable!



User avatar
fgd135
Posts: 470
Joined: Sun Jan 19, 2020 2:55 pm
Location: Colorado
Ski style: Yes, sometimes.
Favorite Skis: Most of them
Favorite boots: Boots that fit
Occupation: Yes

Re: mounting super telemark bindings onto world piste skis

Post by fgd135 » Sun Jun 27, 2021 8:27 pm

WorldMogul wrote:
Thu Jun 24, 2021 11:45 pm
... but a bit of duct tape made it workable!
Red? Red Green?! Didn't know you were a tele skier!
fcac759c6ea5f012926e3bd9f6f1d6a0d946029b528bb22d401d6ac8057c91c0.jpg
"To me, gracefulness on skis should be the end-all of the sport" --Stein Eriksen



Post Reply