Page 1 of 1
Mounting Volie 3 Pin Cable
Posted: Thu Jan 26, 2017 4:29 pm
by GLB
Thinking of switching the Rotefella Chili Telemark binding to the Volie Cable on my Epochs so I can have the option to remove the cables. Do any of you know if the holes will line up and would you mount them in the same place. Or would new holes have to be drilled.
Thanks
Greg
Re: Mounting Volie 3 Pin Cable
Posted: Thu Jan 26, 2017 4:44 pm
by MikeK
3 holes, no riser?
Pretty sure they are the same as pin bindings... but a ruler or overlay could tell you for sure.
Here's the Voile template:
http://www.voile.com/voile_3_hole_mounting_template.pdf
Re: Mounting Volie 3 Pin Cable
Posted: Thu Jan 26, 2017 4:47 pm
by GLB
Awesome. MikeK you are "all over it"
Re: Mounting Volie 3 Pin Cable
Posted: Fri Jan 27, 2017 3:33 am
by Rodbelan
I confirm: it is the exact same hole pattern...
Re: Mounting Volie 3 Pin Cable
Posted: Fri Jan 27, 2017 8:48 am
by MikeK
Thanks Rod.
Re: Mounting Volie 3 Pin Cable
Posted: Fri Jan 27, 2017 12:25 pm
by mainer
Just a word of advice: I'd use epoxy (good stuff like West Systems, not the 2 minute stuff) if you're reusing holes. If things look weird in there (rotten/mushy) drill new holes.