Mounted a 1st Gen Voile Transit binding on my Koms yesterday. Grabbed an Xplore binding and boot and goofed around with what ifs…the hole centers for Xplore and Transit are both apart 26 mm apart width wise. Pin center of Xplore using the Transits rear mount is 24(ish) mm behind Transit pin center. BSL of a size 28 TXPro is 308 mm, my size 44 Fischer Traverse is considerably smaller (a couple of inches). Pondered inserts into the top of the Transit base to allow for throwing an XP binding if a person wanted to soft boot the Kom.
My mindless rambling for the night…
Irrelevant Xplore Musings
-
Inspiredcapers
- Posts: 361
- Joined: Wed Oct 31, 2018 4:11 pm
- Location: Southeast BC
- Ski style: Erratic
- Favorite Skis: Gammes currently at the top of the list
- Favorite boots: Transnordics in NNN-BC & 75mm
- Occupation: Heavy Equipment Operator
-
Inspiredcapers
- Posts: 361
- Joined: Wed Oct 31, 2018 4:11 pm
- Location: Southeast BC
- Ski style: Erratic
- Favorite Skis: Gammes currently at the top of the list
- Favorite boots: Transnordics in NNN-BC & 75mm
- Occupation: Heavy Equipment Operator
Re: Irrelevant Xplore Musings
Still stoopidly icy out there…
Maybe I should have called this thread “Idle F**kery with Voile Transit”. Discovered the Rottefella 75mm rat trap lines up pretty good with a pair of the mounting screw location and has the pin line pretty close to the Transits rear mount pins.
Maybe I should have called this thread “Idle F**kery with Voile Transit”. Discovered the Rottefella 75mm rat trap lines up pretty good with a pair of the mounting screw location and has the pin line pretty close to the Transits rear mount pins.