- Posts: 72
- Joined: Wed Oct 13, 2021 3:26 pm
- Location: Czech Republic
- Ski style: AT, telemark, BC, XC, snowboard (alpine)
- Occupation: messing around in boats
These skis were originally mounted with NNN-BC.
There is a small red stripe about 3-4mm forward of the real balance point (as balanced on a scraper blade).
There is also a long line across the whole width of the ski in a position which could be intended boot center.
The old NNN-BC bindings were mounted with the bar line on the small red mark, so about 3-4mm forward of BP.
Now I want to mount Voile Switchback bindings on these for my own use. I'll use these skis mostly for touring for turns as I have other fjellski for distance touring.
What's the best mounting point for my use with the BC100?
Pin line on the small mark? Pin line on the real balance point? Or go for boot center?
Boots to be used: old Scarpa T2 (2 buckle + power strap) size EU41.
Anyone out here who has skied the Rossi BC100?
So my choice would be equally conventional… toe OR pin line on the balance point. This gives you about 1” to play around with in case both skis’ balance points don’t exactly match, as happens. It also allows you to space out the binding holes from where the NNN BC ones were.
Such a mounting would probably give the best all round results touring, climbing, descending.